The SkyBell DBCAM-TRIM is a 1080P WIFI video doorbell designed for narrow installations. Honeywell's AlarmNet division announced the DBCAM (rebranded around SkyBell HD) integration as the first video doorbell to integrate with their interactive alarm service Total Connect 2.0. That was the original round model and it caused a ton of buzz in the security industry. The DBCAM's unique ability to offer customers a reliable two-way voice and 1080P HD video technology with anyone at their front door spread quickly. After the release, enough customers complained about the width of the video doorbell not quite fitting their narrow existing space. Thus we have DBCAM-TRIM! Both the DBCAM (2.8 inches wide) and the DBCAM-TRIM (1.44 inches wide) are equipped with a full-color night vision camera with a 180 degrees PIR motion detector (up to 10 feet). The wide-angle motion is matched with a 180 degree CMOS image sensor that operates at 15 frames per second (fps). The doorbell can be mounted with the DBCAM-WMK wedge kit to properly angle the camera based on the specific environment. The Omni-directional microphone and integrated speaker (105 dB SPL at 1 cm) allow homeowners to quickly fire open the app when motion is detected and start a conversation from anywhere in the world. The best-added value of these video doorbells is the ability to store video clips on the cloud with TC2. The TRIM can work with an existing low voltage mechanical doorbell system or retrofit a 12VDC or 24VAC power supply. After installation, it must be paired to a local 802.11 b/g/n, 2.4 GHz WIFI network. This is how all video is transmitted to Total Connect 2.0 and the native SkyBell app. Since the DBCAMs are designed for outdoor installation they can handle temperatures ranging from -40 to 140°F (-40 to 60°C) and are IP54-rated for dust and water resistance. Note: You will need a 10 ohm / 10-watt resistor if you intend on using the DBCAM in a location without a mechanical chime.
Brand Name: SkyBell
Color: Silver Finish