Aufero 15.4" Laser Engraver for Wood & Metal (Long Focus)

The perfect engraving tool for makers, DIYers, artists, engineers, and more!

The Aufero 15.4" Laser Engraver is a powerful and efficient machine designed for engraving on both wood and metal surfaces. Equipped with a 32-bit MCU motherboard, it can process up to 32 instructions and achieve an impressive engraving speed of up to 10,000mm/min. With its low gravity center of X-axis, this engraver provides excellent stability and precision even at high processing speeds. Additionally, it is compatible with mature engraving software, making it easy to operate and customize for your engraving needs. The Aufero Laser engraver also features a protective cover that effectively protects your eyes from dazzling beam.

• Advanced motherboard
  1. Driver-free use on most modern operating systems, except for Windows XP & Windows 7, driver required
  2. Higher MCU frequency at 240Mhz and about 10% faster calculation speed than 8th gen motherboard
  3. Support next generation Digital Laser Module
• Low gravity center of X-axis. More stable & accurate engraving even at high processing speed
• Broad compatibility. Compatible with mature engraving software; supports Windows, Mac & Linux
• 4 safety protection. Allows you to hook on your project without any worry
• Dual eye protection. Features a protective cover that effectively protects your eyes from dazzling beam; comes with a pair of goggles for more protection

• Customers must be 18 years old+ to purchase
• Every 50 hours of use, please clean the lens with a medical cotton swab and alcohol

Specs

• Laser module: LU2-4-LF
• Color: silver
• Materials: aluminum profile, sheet metal
• Dimensions: 25.2" x 10.2" x 4.7"
• Motherboard: OLM-PRO-V1.2 Motherboard, 32Bits ESP32MCU
• Firmware: OLF-V180 series firmware
• Add-ons: 1.Ortur Offline Controller 2.Ortur Saftey Enclosure
• Motors: NEMA 17 Stepper Motors
• Mechanical Precision: Y:12.5um，X:12.5um
• Pixel accuracy: adjustable (Default: 300 pixels per inch, about 0.81um pixel accuracy)
• Engraving Area: 390mm×390mm
• Real luminous power: 4,500-5,500mw
• Wave length: 445±5nm
• Focus: long
• Focal spot: 0.17x0.25mm
• Control mode: PWM
• Power rate: S0-S1,000
• Engraving speed: 0-10,000mm/min
• Baud rate: 115200 - 921600 (Default: 115200)
• Computer OS: Win XP, Win 7, Win 8, Win 10 (LaserGRBL) Mac and Linux (LightBurn)
• Control software: LaserGRBL (free), LightBurn (Paid Software)
• Input format: JPG, JPEG, PNG, BMP, SVG, etc.
• Supported materials for engraving: food, MDF, paperboard, black acrylic, leather, stainless steel, power coated metal, stone, etc.
• Supported materials for cutting: plywood, pine board, paperboard, black acrylic, leather, felt cloth, etc.
• Input voltage: 100V-240V (Compatible)
• Power adapter output: 24V / 2A
• Operating temp.: 0℃-65℃
• Safety protection
  • Active Position Protection;
  • Exposure Duration Detection and Limitation
  • Laser Beam Safety Guard;
  • Current Safety Control System
• Manufacturer's 1-year warranty

Includes

• 1x Y-axis Left Part
• 1x Y-axis Right Part
• 1x X-axis Front Part
• 1x X-axis Upper Part
• 1x X-axis Rear Part
• 1x Laser Wire
• 1x Laser Googles
• 4x M5 Cap Nuts
• 4x M5x25mm Screws
• 4x M5x8mm Screws
• 4x M5 Spacers
• 1x USB Cable
• 12x Cable Ties
• 1x 3.0 mm Allen Wrench
• 1x Wrench
• 1x Anodised Aluminum Plate for Adjusting Focus
• 1x Power Adapter
• 1x Acrylic Plate for Testing
• 4x Wooden Plates for Testing
• 1x Brush
• 1x LU2-4-LF Long Focus Laser Module
• 1x Laser Shield
• 2x Screws & Nuts
• 1x Focal Gauge
• 1x Thumb Screw

• Ships to Contiguous US
• Expected Delivery: Dec 26 - Jan 2